FM Shell Alvania Ra-J Low Temperature Lithium-Based Grease -40º C High-Speed Bearing Grease

Product Description

MOLYKOTE 44 Medium High Temperature Bearing Grease

 

Shell Albaniya Grease RA-J is a lithium-based general grease with excellent heat and water resistance, especially at low
temperatures.
Shell Albania Grease RA-J uses lithium soap as a thickener and low-viscosity highly refined mineral oil as the base oil, with
antioxidants and rust inhibitors.
Shell Albania grease RA-J can be used at low temperatures down to -40°C. It is also used in places where large power loss is
undesirable at room temperature. In addition, rolling bearings that are operated at very high speeds,
It is also used for light and medium load flat bearings.

Operating temperature range : -40 °C ~ +130 °C

Features of Shell Albania Grease RA-J

1. Consideration for the global environment
Shell Albania Grease RA-J does not use raw materials that are considered to have a negative impact on the global environment. In addition to contributing to environmental conservation, a safe working environment can be ensured.

2. Excellent low temperature
Since it is based on highly refined low-viscosity mineral oil, the starting torque at low temperatures is small, and excellent
lubricity is demonstrated at low temperatures.

3. Wide operating temperature range (-40°C~130°C)
It is a grease mainly developed for low temperature / high speed, and uses highly refined base oil, so the low temperature is
compared to the original.
It can be used up to a relatively high temperature.

4. Excellent rust resistance
It has excellent anti-rust performance even under high humidity conditions and can also be used as an anti-rust grease.

5. Excellent acoustic properties
Results that satisfy the severe acoustic characteristics required by electric motors can be obtained.
 

Shell Albania Grease RA-J Representative Properties
Test items			Test method	Representative status
Exterior view				smooth, brown
Thickener				lithium
Raw base oil	Ta Ip			Mineral oil
	Dynamic viscosity mm2/ s	@40ºC @100ºC	HE K 2283	40
				6.3
Miscibility			HE K 2220 7.	243
Dropping point °C			HE K 2220 8.	187
Evaporation (99°C×22h) wt%			HE K 2220 10.	0.3
Oil separation (100°C×24h) wt%.			HE K 2220 11.	1.8

OTHER HOT SELLING

Molykote EM-30L: Synthetic grease specially developed for parts in the plastics sector.Used in automotive parts, electrical
appliances, instruments, audio equipment, office equipment plastic parts.

Molykote EM-50L: Excellent compatibility with most plastics, specially formulated to enhance surface adhesion and reduce noise.It is suitable for lubrication of plastic and plastic metal in electromechanical equipment. It is used as silencing grease for automobile, electrical equipment, equipment, audio-visual equipment and office equipment with plastic components to reduce noise from moving components such as gears.

Molykote X5-6020: Contains solid lubricant.Used in fiber reinforced plastics.Sliding contact bearings in automobiles, electrical equipment, audio and video recorders, CD players and cameras with plastic parts, gears for household appliances, photocopiers and other office equipment, etc.Operating temperature: -30ºC~130ºC

Molykote EM-60L: Low temperature torque, operating temperature as low as -60 ° C.Automobiles, electrical equipment, audio equipment and office equipment with plastic components requiring low torque and low temperature lubrication components.

Molykote HP-870: Widely used in harsh conditions such as high temperature, corrosion, solvents, liquefied petroleum gas, high vacuum, etc.Designed for clean rooms without volatile lubricants, semiconductor manufacturing equipment, paper manufacturing equipment, hot air oven, motor, wheel and axle applications.

Molykote HP-500: Widely used in harsh conditions, such as high temperature, corrosion, solvents, liquefied petroleum gas, high vacuum, etc.Can be used in need

Avoid the occasions where lubricating materials evaporate, such as equipment in clean rooms and semiconductor manufacturing equipment.Can be used in beverage and food factory oven and other high temperature occasions;Operating temperature range:-20ºC~250ºC, short-term up to 280ºC

Molykote HP-300: can be widely used in harsh conditions, such as high temperature, corrosion, solvents, liquefied petroleum gas, high vacuum, etc.It can be used to avoid the evaporation of lubricating materials, such as equipment in clean rooms and semiconductor manufacturing equipment;Can be used in beverage and food factory oven and other high temperature occasions;It can be used for mold protection of plastic and rubber injection molding machinery.Operating temperature -65ºC~250ºC, short - term up to 280ºC

1.What is the minimum order quantity for this product?

Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales, most customers'orders are more than 1 ton.

2.What is your latest delivery time?
Most orders will be shipped within 3-10 days of payment being received.

3.Does your company have quality assurance?
Yes, for 2 years.

4.What is the competitiveness of your company's products compared to other companies?
High precision, high speed, low noise.

5.What are the advantages of your company's services compared to other companies?
Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by customers for customs clearance or sales. 100% after-sales service.

6.Which payment method does your company support?
Do our best to meet customer needs, negotiable.

7.How to contact us quickly?
Please send us an inquiry or message and leave your other contact information, such as phone number, whatsapp account or wechat account, we will contact you as soon as possible and provide the detailed information you need.